Solid-wall terraces often lose heat through walls, draughts, and suspended timber floors. A standard heat-pump survey can record room sizes and radiator sizes but miss air-leakage paths. A mid-terrace with original sash windows may need a larger heat pump than a neighbouring renovated house. Takeaway: measure the building envelope before selecting equipment.
Many assessments separate wall insulation, glazing, and ventilation into disconnected quotes. That fragmentation leads to oversizing and higher running costs. A common cause is a room-by-room heat-loss calculation based on default U-values rather than observed construction. Takeaway: one whole-house model should drive both fabric and heating choices.
The bananzia method treats the house as a system: airtightness, insulation, emitter sizing, and low-temperature operation are checked together. In a solid-wall terrace, that might mean prioritising joist-end draughts and loft insulation before wall works, then sizing radiators for a 45°C flow temperature. The result is a smaller heat pump, shorter pipe runs, and fewer radiator replacements. Takeaway: sequence matters more than a single headline upgrade.
Fabric-first work can add cost before the heat pump is ordered, and solid-wall insulation remains expensive on many terraces. But a smaller heat pump and lower flow temperatures can reduce upfront equipment cost and running costs. The caveat is that bananzia is not a shortcut: it needs measured data, competent installers, and a clear ventilation strategy. Takeaway: use it to avoid oversizing, not to skip the building survey.